Trane XR401 Comfort Control - Entering and Navigating User Setup; Keypad Navigation in Setup; FILTER;OD: Outdoor Temperature View

FILTER/OD
Filter/O
D
Page - 7
Pub. No. 22-5206-05
Filter/O
D
- When the optional outdoor sensor is installed, outdoor temperature can be
viewed on the Comfort Control’s display by simply pressing the “FILTER/OD”
key.
Page - 18
Pub. No. 22-5206-05
Entering User Setup:
Press and hold the MODE and FAN keypad buttons at the same time.
Keypad Navigation:
- Use the MODE or FAN buttons to navigate forward and backward through the Setup steps.
- Press MODE to advance forward to the next step.
- Press FAN to return to the previous step.
- Use the UP and DOWN arrow keypad buttons to select or change Setup options.
User
Setup
Options