Trane XT300C User Manual

XT300C DELUXE PROGRAMMABLE HEAT-COOL THERMOSTAT
7
69-1212—1
Pub. No. 18-HD25D1-3
Table 3. Installer Setup Options for the XT300C
(Continued) .
M12951
Set Current
Day/Time
Mon
PM
Set Day/Time
Time
Set Program
SystemFilter Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
IMPORTANT
Review the settings to confirm that they match the system. Press Run Program to exit the Installer Setup. The
thermostat saves the Installer Setup changes and initiates a reset in order to operate using the new settings.
NOTE: For initial installations only, set the current day and time following the setup reset.
NOTE: Sun=Sunday, Mon=Monday, Tue=Tuesday,
Wed=Wednesday, Thu=Thursday, Fri=Friday,
Sat=Saturday.
Setting Current Day and Time
1. Press Set Current Day/Time.
NOTE: On initial power up or after an extended power loss,
1:00 pm flashes on the display until a key is pressed.
2. Press Day until the current day displays.
Time
Set Program
SystemFilter Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
M12952
Day
PM
Tue
Set Day/Time
Time
Set Program
SystemFilter Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
M12954
Daylight
Time
AM
DST
Tue
Set Day/Time
M12955
Run
Program
Auto
System Fan
Wake
Room
AM
DST
Tue
Heat
Time
Set Program
SystemFilter Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Time
Set Program
SystemFilter Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
M12953
Time
AM
Tue
Set Day/Time
time in one hour increments.
NOTE: If the current time is Daylight Savings Time, press
Daylight Time until DST displays.
4. Press Run Program.
3. Press Time ▲ or Time ▼ until the current time displays.
NOTE: Tapping the Set Current Day/Time will change the
Press Time
▲ or ▼
Press Increase ▲ or Decrease ▼ to change setting
Installer
Factory Setting Other Choices
Actual
Select
Setup Number
Display Description Display Description
Setting
Minimum Off
Time (Cool)
39 5 5 minute minimum off
time for equipment
0 thru 15 Minimum number of minutes
(0 thru 15) the equipment
will be off between calls for
cool
Cooling Droop 41 1 Cooling droop
activated
0 No cooling droop
Programming 42
Press Time ▼ to
bypass 2–41 and
go directly to
setup #42
0 7-day programming 1 or 2 1—24-hour programming
2—No programming

Trane XT300C Specifications

General

Brand	Trane
Model	XT300C
Category	Thermostat
Language	English