Preventive Maintenance
Cleaning Instructions:
1. Remove Inner Chassis as shown above
2. Open top cover all the way to allow airflow between print-head and platen roller
3. Remove any loose particles using compressed air
4. Clean ticket burst area (under top cover) with a lint free cloth
5. Supply power to the printer ether by reinstalling it back into a game or using the Download Kit’s power
supply
6. Open cleaning card pouch and remove cleaning card
7. Insert cleaning card into feed path while applying some tension thereby cleaning the entire surface of the
platen roller
8. Open the top cover and remove the cleaning card
9. Repeat process if necessary
10. Properly dispose of used cleaning card
Waffletechnology cleaning cards with cutout notches:
Insert cleaning card into feed path with the notches towards the leading edge and use the FEED button to feed
it through 2x.
Warnings:
IPA solvents can damage rubber rollers with frequent use. TransAct recommends a maximum usage of 2x
annually.
The thermo print-head’s life can be reduced with excessive friction. When cleaning the component directly,
TransAct recommends using an IPA solvent on a nonabrasive lint free cloth.
Purchasing cleaning cards:
Cleaning cards are available through SUZOHAPP.
To Next Page
Loading...
