Need help?Do you have a question about the TransAct Epic 430 and is the answer not in the manual?
Lists the features that are standard for all Epic 430 printers.
Describes the optional features that can be purchased for the Epic 430 printer.
Details general specifications like dimensions, weight, and interface types for the Epic 430.
Details the AC voltage and frequency requirements for the printer.
Specifies the DC voltage and current requirements for the printer.
Details printing method, resolution, speed, and print elements.
Specifies paper type, width, thickness, and roll dimensions.
Describes the auto-cutter feature, its type, and specifications.
Details the available communication interfaces, RS-232 and USB.
Explains RS-232 serial port features, pin-outs, and voltage levels.
Describes the USB interface version and connector pin functions.
Details the 4-pin Molex power input connector and its pin functions.
Covers the user interface elements like indicator lights and buttons for printer operation.
Details the functions of the four LED indicators on the printer.
Explains the functions of the FEED button based on press duration.
Describes the TEST button's functions and how to use it.
Guide to performing self-tests for printer operation verification.
Explains the diagnostic tests performed at power-up.
Details the steps to enter configuration mode and change printer settings.
Safety precautions, including ESD, to be observed before disassembling the printer.
Step-by-step instructions for assembling the printer mechanism components.
General| Resolution | 203 DPI |
|---|---|
| Print Technology | Thermal |
| Print Speed | Up to 10 inches per second |
| Connectivity | Serial, USB, Ethernet |
| Operating System Compatibility | Windows, Linux |
| Media Type | Thermal receipt paper |
To Next Page
