Chapter 5 • Starting and Ending Therapy • page 18
Using the Ramp Function
Ramp settings will be programmed by your provider if your prescription includes
ramp.
1 Initiate ramp by pressing the ramp, or top, button after the blue power button
has been pressed.
Please note: the ramp button on Transcend will not work unless your
prescription includes ramp.
2 Therapy pressure will drop to a starting pressure that has been preset by your
provider, and will gradually increase over a preset period of time until it
reaches your prescribed therapy pressure.
3 To accelerate the ramp pressure, hold the ramp button down. The device will
stop ramp mode when it reaches your prescribed therapy pressure.
Ending Therapy
• To end therapy, press the blue power button to return the device to the
Standby mode.
USING
To Next Page
Loading...
