Need help?Do you have a question about the Transcend CPAP and is the answer not in the manual?
General| Pressure Range | 4-20 cm H2O |
|---|---|
| Data Storage | SD Card |
| Ramp | Yes |
| Type | CPAP Machine |
| Sound Level | < 30 dB |
| Therapy Modes | CPAP |
| Humidifier | Integrated |
| Noise Level | < 30 dB |
| Power Source | AC Adapter |
| Weight | 2.8 lbs (1.27 kg) |
| Power Supply | AC power adapter |
| Altitude Adjustment | Automatic |
Assemble the main CPAP system components.
Assemble the H6B humidification system.
Assemble the HGM humidification system.
Fit the H6B interface and headgear.
Fit the HGM interface and headgear.
Turn on the Transcend device.
Use the ramp feature for pressure.
Turn off the Transcend device.
Daily clean the inside of the Transcend.
Clean the outer surface of the Transcend.
Wash mask, headgear, interface weekly.
Change the Heat Moisture Exchanger (HME).
Replace air inlet filter every six months.
Install Somnetics therapy software.
Overview of therapy management software.
View provider contact details.
Check patient compliance data.
Email compliance data to provider.
View, save, or email device fault logs.
To Next Page
