Chapter 6 • Caring for Your Transcend and Components • page 21
Replacing the Transcend HME
The HME should be changed weekly and can be purchased through your home
healthcare provider.
1. Disconnect the Transcend hose from the mask shell by grasping the HME
cartridge and release the lateral clips.
2. Insert the heat moisture exchanger (HME) into the HME cartridge using the
plastic pin in the center of the HME.
3. Reconnect the Transcend hose to the mask shell. You will hear an audible
click once it is in place.
1
3
2
CARING
To Next Page
Loading...
