Transcend CPAP - Replacing Air Inlet Filter; Replacing the Air Inlet Filter

Chapter 6 • Caring for Your Transcend and Components • page 22
Replacing the Air Inlet Filter
Transcend’s air inlet filter should be replaced every six months. To purchase a
new air inlet filter, please contact your home healthcare provider.
1. Remove the CPAP pad from the bottom of the CPAP.
2. Remove the filter plate by gently squeezing the tab at the back of the plate
towards the front of the plate and pulling the plate away from the CPAP.
3. To replace the new filter plate, lay it on the bottom of the CPAP. Snap the
front clips into place first; then the back clips. Make sure the filter plate is
completely connected and discard the used filter plate.
4. Reattach the CPAP pad.
1
3
2
CARING