Chapter 2 • Assembling Your Transcend • page 4
Transcend H
6
B Waterless Humidification System
To completely assemble the Transcend H
6
B Waterless Humidification System:
1. Attach the adaptor ring to the mask shell. Connect the top clip first; then
connect the bottom clips. Both must click firmly into place.
2. Clip the nasal seal firmly into the adaptor ring.
3. Connect the adjustment arm bar of the appropriate size to the mask shell by
squeezing the sides of the arm until it fits into place.
4. Slide the arm bar into the forehead piece.
34
1
2
ASSEMBLING
To Next Page
Loading...
