• ASSEMBLING YOUR TRANSCEND
2
Transcend Sleep Apnea Therapy Starter System
To completely assemble the Transcend Sleep Apnea Therapy Starter System:
1. Attach the Universal Hose Adaptor to the CPAP nose cone.
2. Attach the standard 6 foot hose to the Universal Hose Adaptor.
3. Attach the interface to the other end of the hose.
4. Plug the power supply into the CPAP.
5. Connect the power supply to a power source.
ASSEMBLING
Chapter 2 • Fitting Your Transcend • page 3
To Next Page
Loading...
