Chapter 2 • Assembling Your Transcend • page 5
5. Attach the headgear to the interface and connect the forehead pad to the
forehead piece.
6. Connect the top headgear strap through the slot on the side of the headgear.
7. Insert the heat moisture exchanger (HME) into the HME cartridge using the
plastic pin in the center of the HME.
8. Connect the Transcend H
6
B hose to the mask shell. You will hear an audible
click once it is in place.
56
7
8
ASSEMBLING
To Next Page
Loading...
