3-2 Inserting a microSD Memory Card
A microSD memory card is required before recording. Please use a microSD memory card
with 32GB, 64GB, 128GB or 256GB capacity (Class 10 or above).
1. Rotate protective case anti-clockwise until loose.
2. Insert a microSD memory card into the appropriate card slot.
3. To remove, push to remove the memory card out of the slot.
The following table shows approximate recording time according to capacity and resolution
(for reference only):
Frame Rate \ Capacity 32GB 64GB 128GB 256GB
Full HD 1080P 60 fps 2.5 hr 5 hr 10.5 hr 22 hr
Full HD 1080P 30 fps 3.5 hr 7 hr 14 hr 29 hr
HD 720P 60fps 5.5 hr 11 hr 21.5 hr 45 hr
HD 720P 30fps 8.5 hr 17 hr 34.5 hr 70 hr
NOTE
Always format new memory cards in the DrivePro before using them for the first time.
Formatting will erase all data on the memory card.
Make sure the allocation Unit Size of the microSD card is 32 KB or larger; if not, the DrivePro
may not work properly.
WARNING
Do not remove the memory card during a shutdown to avoid damages to the memory card and
loss of recorded videos. DrivePro 20 can support FAT32 and exFAT file format, but not NTFS.
To Next Page
Loading...
