Transcend DrivePro 20 - DrivePro Basic Operations and Vibration Feedback; DrivePro LED Status Indicator Guide

3-5 Operation
Status Operation Vibration
Turn on/off
dashcam
Long press Power Button for 3 s Vibration-short
Turn on/off Wi-
Fi
Press Power Button once Vibration-short
Reset to default
In recording mode, long press Power
Button for 10 s
Vibration-long
Low battery -- Vibrate twice every 30 s
Disk error --
Vibrate twice every 5 s and turn off
after 180 s
3-6 LED Indicator
LED Status Description
Red
Flashing
Flashing quickly
Flashing quickly twice every
interval
Solid
Recording/Firmware Upgrade
Emergency Recording/Formatting
Low Battery
Power Saving Mode/Disk Error/Connecting to
Computer
Blue Flashing Recording and Wi-Fi On
Orange Solid Charging
WARNING
All files will be deleted when the dashcam is reset to default.
