Basic Operation︱
Charging the Battery
Remove the MP330‟s cap and plug its USB connector directly into an available USB port on your desktop or
notebook computer. The MP330‟s internal Li-ion battery will begin charging. A battery charging indicator will
appear in the upper right hand corner of the player‟s screen. Leave the player plugged in until the battery
charging animation stops.
NEVER plug the MP330 into a USB hub or an external USB port located on a keyboard,
monitor or other peripheral. This can permanently damage your digital music player.
When charging the battery, Please plug the MP330 directly into your computer’s built-in USB port
or use the Transcend USB Power Adapter (optional).
Power ON
Press and hold the button to turn on the player. An animated logo will appear, followed by the player
status information. After the startup sequence, the Main Menu will be displayed, indicating the MP330 is ready
for use.
It takes a few seconds for the MP330 to power up.
If the lock icon appears on the display while powering on the MP330, this means
that the switch is enabled ( ). You must switch off the Hold mode ( ) before you can
power on the player.
Power Off
Press and hold the button to turn off the MP330.
It takes a few seconds to completely power down.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
