Record Quality
The quality of an audio recording can be set to Low, Medium, or High. Higher recording quality settings require
more memory space to save the recorded WAV files.
1. In the REC Settings menu, use the / to select the “Record Quality”
and press
.
2. Use / to switch between “Low”, “Medium”, or “High” and press to confirm.
Maximum Record Time / Quality Table
Note: The above recording times may not be possible if space is limited or the battery power is low.
VAD (Voice Activity Detection)
VAD allows the MP330 to make gapless voice recordings. This means during voice recording with the internal
microphone, the player will only record when it detects voices. If the person(s) pauses or stops speaking, the
MP330 will temporarily stop recording until the person(s) starts speaking again. This allows for more concise,
easier to understand recordings and smaller recording files.
1. In the REC Settings menu, use / to select “VAD” and press .
2. Use / to switch between “Enable” or “Disable” and press .
To Next Page
Loading...
Need help?
General
Weight and Dimensions
