Transition Networks SGFEB10 Series - Fiber Cable Specs

Transition Networks SGFEB 10/100/1000 Bridging Media Converter User Guide
33601 Rev. D www.transition.com Page 18 of 25
Fiber Cable Specs
The fiber optic transmitters on these devices meet Class I Laser safety requirements per IEC-825/CDRH standards
and comply with 21 CFR1040.10 and 21CFR1040.11.
Bit Error Rate: <10-9
Single mode fiber: 9 μm
Multimode fiber: 62.5/125 μm
Multimode fiber: 50/125 μm
SGFEB1013-130 850nm multimode
Fiber Optic Transmitter Power: min: -9.5 dBm max: -4.0 dBm
Fiber Optic Receiver Sensitivity: min: -17.0 dBm max: 0.0 dBm
Link Budget: 7.5 dB
SGFEB1029-130 1310nm TX/1550nm RX single mode
SGFEB1029-131 1550nm TX/1310nm RX single mode
Fiber Optic Transmitter Power: min: -8.0 dBm max: -3.0 dBm
Fiber Optic Receiver Sensitivity: min: -21.0 dBm max: -3.0 dBm
Link Budget: 13.0 dB
SGFEB1039-130 850nm multimode (LC)
Fiber Optic Transmitter Power: min: -9.0 dBm max: -4.0 dBm
Fiber Optic Receiver Sensitivity: min: -17.0 dBm max: -3.0 dBm
LInk Budget: 8.0 dB
SGFEB1024-130 1300nm Extended MM (SC)
Fiber Optic Transmitter Power: min: -10.0 dBm max: -3.0 dBm
Fiber Optic Receiver Sensitivity: min: -17.0 dBm max: -3.0 dBm
Link Budget: 7.0db
SGFEB1014-130 1310nm SM (SC)
Fiber Optic Transmitter Power: min: -9.0 dBm max: -3.0 dBm
Fiber Optic Receiver Sensitivity: min: dBm -21.0 dBm max: -3.0 dBm
LInk Budget: 12.0 dB
SGFEB1019-130 1310nm SM (LC)
Fiber Optic Transmitter Power: min: -9.5 dBm max: -3.0 dBm
Fiber Optic Receiver Sensitivity: min: -20.0 dBm max: -3.0 dBm
LInk Budget: 10.5 dB