Transition Networks SGFEB 10/100/1000 Bridging Media Converter User Guide
33601 Rev. D www.transition.com Page 3 of 25
Optional Accessories (sold separately)
Wide Input (24 – 60VDC) Power Supply
Wide Input (24 – 60VDC) Power Supply
25025
12VDC@1.25A, 100-240VAC (~1.0A) Power Supply (requires a country-specific power
cord; contact TN for power cord options)
DIN Rail Mount Bracket 5.0 inches (127 mm)
Wall Mount Bracket 4.0 inches (102 mm)
12-Slot Media Converter Rack
4-Slot Media Converter Shelf
See the TN Small Form factor Pluggables webpage
Distances
The distances listed below are typical maximum cable distances. Actual distance depends on the physical
characteristics of the network installation.
Install SGFEB1029-130 and SGFEB1029-131 single-fiber optic in the same network where one is the
local converter and the other is the remote converter.
Part #
Copper Ports
10/100/1000-Base-T
Duplex Fiber-Optic Ports
SGFEB1013-130
SC, 1000Base-SX, 850nm multimode
220m (OM1)/550m (OM2) (720/1,805 ft)
SGFEB1040-130
One 100/1000 Base-X SFP slot (empty)
SGFEB1040-230
Two 100/1000 Base-X SFP slots (empty)
SGFEB1040-330
Two 100/1000 Base-X SFP slots (empty)
SGFEB1039-130
LC, 1000Base-SX, 850nm multimode
220m (OM1)/550m (OM2) 720/1805 ft.)
SGFEB1024-130
SC, 1000Base-SX 1300nm Extended MM
(62.5/125um fiber only) (SC) [up to 2km]
SGFEB1014-130
SC, 1000Base-LX, 1310nm single mode
10km / 6.2 miles
SGFEB1019-130
LC, 1000Base-LX, 1310nm single mode
10km / 6.2 miles
SGFEB1029-130
SC, 1000Base-LX, 1310nm TX / 1550nm RX
Single mode, 20 Km / 12.4 miles
SGFEB1029-131
SC, 1000Base-LX, 1550nm TX / 1310nm RX
Single mode, 20 Km / 12.4 miles