Trapeze Mobility Point Series - Page 34

Installing an MP—Models MP-341 and MP-352
Chapter 3
Trapeze Mobility Point Installation Guide
Version 3.0
28
Confidential—Beta1 Draft—Confidential—Beta1 Draft—20 Sep 04
Figure 9 shows the universal mounting bracket.
Junction box Junction box No
Two #6-32 x 1-inch machine screws Yes
Universal mounting bracket Yes
Small screwdriver (3-mm or
1/8-inch)
No
#2 Phillips-head screwdriver No
Solid wall or ceiling Two #6 sheet metal screws and two
drywall anchors
Yes
Universal mounting bracket Yes
Hammer No
Small screwdriver (3-mm or
1/8-inch)
No
#2 Phillips-head screwdriver No
Tabletop Universal mounting bracket Yes
Three adhesive rubber feet Yes
Small screwdriver (3-mm or
1/8-inch)
No
Table 6. Required Mounting Hardware and Tools—Models MP-341
and MP-352 (continued)
Mounting Option Required Hardware and Tools
Included with the
Product