Documentation
Chapter 1
Trapeze Mobility Point Installation Guide
Version 3.0
2
Confidential—Beta1 Draft—Confidential—Beta1 Draft—20 Sep 04
The Trapeze Networks Mobility System consists of the following components:
● RingMaster tool suite—A full-featured graphical user interface (GUI) client
application for planning, configuring, and deploying a WLAN and its users;
and a centralized service application for WLAN and user monitoring,
reporting, and diagnostics
● One or more Mobility Exchange™ (MX™) switches—Distributed,
intelligent machines for managing user connectivity, connecting and
powering Mobility Point (MP) access points, and connecting the WLAN to
the wired network backbone
● Multiple Mobility Point™ (MP™) access points—Wireless access points
(APs) that transmit and receive radio frequency (RF) signals to and from
wireless users and connect them to an MX switch
● Mobility System Software™ (MSS™)—The operating system that runs all
MX switches and MP access points in a WLAN, and is accessible through a
command-line interface (CLI), the Web View interface, or the RingMaster
GUI
Documentation
Consult the following documents to plan, install, configure, and manage a Trapeze
Networks Mobility System.
Planning, Configuration, and Deployment
Trapeze RingMaster User’s Guide. Instructions for planning, configuring,
deploying, and managing the entire WLAN with the RingMaster tool suite. Read
this guide to learn how to plan wireless services, how to configure and deploy
Trapeze equipment to provide those services, and how to optimize and manage
your WLAN.
Trapeze RingMaster Reference Manual. Detailed instructions and information for
all RingMaster planning, configuration, and management features.
To Next Page
