Trapeze Mobility Point Series - Page 80

Appendix B
Trapeze Mobility Point Installation Guide
Version 3.0
74
Confidential—Internal Draft—Confidential—Internal Draft—20 Sep 04
Table 13. MAC Address Allocations on MP Access Points
MP access point All models
• The MP has a base MAC address. All the other
addresses are assigned based on this address.
Ethernet Ports All models
• Ethernet port 1 equals the MP base MAC address.
• Ethernet port 2 (if the MP model has one) equals
the MP base MAC address + 1.
Radios and
SSIDs
MP-352
MP-262
MP-252
MP-52
• The 802.11b/g radio equals the MP base MAC
address + 2.
• The BSSIDs for the SSIDs configured on the
802.11b/g radio end in even numbers. The first
BSSID is equal to the MP’s base MAC address.
The next BSSID is equal to the MP’s base MAC
address + 2, and so on.
• The 802.11a radio equals the MP base MAC
address + 3.
• The BSSIDs for the SSIDs configured on the
802.11b/g radio end in odd numbers. The first
BSSID is equal to the MP’s base MAC address
+ 1. The next BSSID is equal to the MP’s base
MAC address + 3, and so on.
MP-341
MP-241
• The radio equals the MP base MAC address + 2.
• The BSSIDs for the SSIDs configured on the radio
end in even numbers. The first BSSID is equal to
the MP’s base MAC address. The next BSSID is
equal to the MP’s base MAC address + 2, and so
on.
MP-122
• The 802.11b radio equals the base MAC address
+ 2, for both the clear and encrypted SSIDs.
• The 802.11a radio equals the base address + 3, for
both the clear and encrypted SSIDs.
MP-101
• The radio equals the base MAC address + 2, for
both the clear and encrypted SSIDs.