Using the Supporting Belt
When the mower fits well with the supporting
belt, it makes the job considerably easier. A good
fit will help you avoid sore arms and back pain.
You can adjust the equipment to your own needs
with your arms slightly curved.
How high you'll hold the mower will depend on
what kind of terrain you'll have to cope with. The
more difficult the environment - many stones and
branches - the higher it should be.
Where to Connect
Before connecting, always check if the mower's
tension is the same as the power supply.
Put the mower on the ground, fold the
extension cord (1) at the female-plug end, with
enough slack to connect it to the maleplug on
the motor's outlet (2).
Hook the extension cord's fold to the lock (3),
as seen in the picture and only then connect
the male-plug to the power source.
3
1
2
To Next Page
Loading...
