─ 24 ─
Console Panel Functions
8. Dot MATRIX
8.1 Indicates the lap count and displays which lap you are on. (One lap is 400
meters)
8.2 Indicates 'PRESS QUICK START OR SELECT PROGRAM' when turn on power.
8.3 Indicates message when enter value.
8.4 Indicates workout curve in Program mode.
CONSOLE BUTTONS
1. START
This button is used to start the current program.
2. STOP
This button is used to stop the current program.
3. SPEED+ and SPEED-
This button is used to adjust the speed of the treadmill during workout.
4. INCLINE+ and INCLINE-
These buttons are used to adjust the incline of the treadmill during workout.
5. NUMERIC KEYPAD
These buttons are used to cycle through to the desired data.
6. OK
This button is used to enter value of program mode.
7. PROGRAM
These buttons are used to cycle through to the desired program.
8. ENTER
This button is used to enter value of program mode.
9. COOL DOWN
This button is used select workout "cool down mode".
10. DELETE (▲) BUTTON
This button is used delete data.
11. FAN BUTTON
Turn on and turn off the fan and adjust the fan speed.
To Next Page
Loading...