Treadmill RT500 - If Fatburn Mode Is Selected; If Step Mode Is Selected; If 5 KM Mode Is Selected

─ 26 ─
Console Panel Functions
2.2 If FATBURN MODE is selected
2.2.1 Dot matrix scrolls 'FATBURN MODE ENTER TIME';
2.2.2 Time window will be flash '30:00', Use speed + or – button to adjust default
value;
2.2.3 Press ENTER to confirm;
2.2.4 Dot matrix scrolls 'ENTER WEIGHT', Time window will be flash '68', Use
speed + or – button to adjust default value;
2.2.5 Press ENTER to confirm;
2.2.6 Dot matrix scrolls 'PRESS QUICK START';
2.2.7 If press QUICK START Button, Top time LED updates;
2.2.8 LED displays "3", "2", "1", Belt starts moving.
2.3 If STEP MODE is selected
2.3.1 Dot matrix scrolls 'STEP MODE ENTER STEPS';
2.3.2 Step window will be flash '8000', Use speed + or – button to adjust default
value;
2.3.3 Press ENTER to confirm;
2.3.4 Dot matrix scrolls 'ENTER WEIGHT', Time window will be flash '68', Use
speed + or – button to adjust default value;
2.3.5 Press ENTER to confirm;
2.3.6 Dot matrix scrolls 'PRESS QUICK START';
2.3.7 If press QUICK START Button, Top time LED updates;
2.3.8 LED displays "3", "2", "1", Belt starts moving.
2.4 If 5KM MODE is selected
2.4.1 Dot matrix scrolls '5KM MODE';
2.4.2 Press ENTER to confirm;
2.4.3 Dot matrix scrolls 'ENTER WEIGHT', Time window will be flash '68', Use
speed + or – button to adjust default value;
2.4.4 Press ENTER to confirm;
2.4.5 Dot matrix scrolls 'PRESS QUICK START';
2.4.6 If press QUICK START Button, Top time LED updates;
2.4.7 LED displays "3", "2", "1", Belt starts moving.