Treadmill RT500 - If 10 KM Mode Is Selected; If Hill Mode Is Selected

─ 27 ─
Console Panel Functions
2.5 If 10KM MODE is selected
2.5.1 Dot matrix scrolls '10KM MODE';
2.5.2 Press ENTER to confirm;
2.5.3 Dot matrix scrolls 'ENTER WEIGHT', Time window will be flash '68', Use
speed + or – button to adjust default value;
2.5.4 Press ENTER to confirm;
2.5.5 Dot matrix scrolls 'PRESS QUICK START';
2.5.6 If press QUICK START Button, Top time LED updates;
2.5.7 LED displays "3", "2", "1", Belt starts moving.
2.6 If HILL MODE is selected
2.6.1 Dot matrix scrolls 'HILL MODE ENTER TIME';
2.6.2 Time window will be flash '30:00', Use speed + or – button to adjust default
value;
2.6.3 Press ENTER to confirm;
2.6.4 Dot matrix scrolls 'ENTER WEIGHT', Time window will be flash '68', Use
speed + or – button to adjust default value;
2.6.5 Press ENTER to confirm;
2.6.6 Dot matrix scrolls 'PRESS QUICK START';
2.6.7 If press QUICK START Button, Top time LED updates;
2.6.8 LED displays "3", "2", "1", Belt starts moving.
2.7 If HR=65% MODE is selected
2.7.1 Dot matrix scrolls 'HR=65% MODE ENTER TIME';
2.7.2 Time window will be flash '30:00', Use speed + or – button to adjust default
value;
2.7.3 Press ENTER to confirm;
2.7.4 Dot matrix scrolls 'ENTER WEIGHT', Time window will be flash '68', Use
speed + or – button to adjust default value;
2.7.5 Press ENTER to confirm;
2.7.6 Dot matrix scrolls 'ENTER AGE', Calories window will be flash '25', Use
speed + or – button to adjust default value;
2.7.7 Press ENTER to confirm;
2.7.8 Dot matrix scrolls 'PRESS QUICK START';