Treadmill RT500 - Console Operation; Quick Start;Manual Mode; Program Mode; If Cardio Mode Is Selected

─ 25 ─
Console Panel Functions
CONSOLE OPERATION
1. QUICK START/MANUAL MODE
1.1 Plug into surge protector outlet. Stand on the treadmill and straddle belt.
1.2 Turn on power.
1.3 The LED screen scrolls "PRESS QUICK START OR SELECT PROGRAM".
1.3.1 If press start button through manual mode;
1.3.2 If press PROGRAM Button, will cycle through to the desired CARDIO MODE,
FATBURN MODE, STEP MODE, 5KM MODE, 10KM MODE, HILL MODE, HR=65%
MODE, HR=75% MODE, HR=85% MODE, CALORIES COUNT DOWN, TIME COUNT
DOWN, DISTANCE COUNT DOWN.
1.4 Press STOP button belt will stop, speed window will be zero, other window
will be keep. Press STOP button again, reset total window.
2. PROGRAM MODE
When console turns on, the LED screen scrolls "PRESS QUICK START OR SELECT
PROGRAM". If press PROGRAM Button, will cycle through to the desired CARDIO
MODE, FATBURN MODE, STEP MODE, 5KM MODE, 10KM MODE, HILL MODE,
HR=65% MODE, HR=75% MODE, HR=85% MODE. CALORIES COUNT DOWN\ TIME
COUNT DOWN\ DISTANCE COUNT DOWN.
2.1 If CARDIO MODE is selected
2.1.1 Dot matrix scrolls 'CARDIO MODE ENTER TIME';
2.1.2 Time window will be flash '30:00', Use speed + or – button to adjust default
value;
2.1.3 Press ENTER to confirm;
2.1.4 Dot matrix scrolls 'ENTER WEIGHT', Time window will be flash '68', Use
speed + or – button to adjust default value;
2.1.5 Press ENTER to confirm;
2.1.6 Dot matrix scrolls 'PRESS QUICK START';
2.1.7 If press QUICK START Button, Top time LED updates;
2.1.8 LED displays "3", "2", "1", Belt starts moving.