ā 9 ā
Using Method
Please read carefully and using follow the functions:
1. put the plug in the socket, turn on the switch.
2. grasp the handle firmly, stand on the treadmill.
3. clip the clothes using the safety clip.
4. you can operate this device according as the manual set the lowest speed, first
then increase the speed gradually.
5. you should grasp the handle firmly by one hand, when you operating the
console.
6. Take care to use treadmill. Start from low speed handed to the uprights leaving
from treadmill after reducing speed and stopping all functions.
7. Press Safety Switch on emergency.
8. Keep warm and relax your body after workout.
Exercise time and exercise frequency at a time:
Exercise time: 30minuates----Normal;
Exercise frequency: Warm your body by 10---20minutes under 8Kph,
then increase speed accordingly.
CE Switch and Safety Switch Introduction
When the treadmill is running, the user can
press the red safety switch directly if he
wants to stop it. Then the treadmill will stop
slowly. If the user encounters emergency
when he using the treadmill he should haul
the safety clip linked with red wire, it will
triger the safety switch to step.
Operation:
1. Press the CE switch and keep it at the low position, tie the safety clip to your
cloth, then start the treadmill for exercise.
2. If there is any emergency, the clip tied to your cloth will pull the CE switch and
it will come to the origal position. In the mean time, the treadmill will stop
completely and the main power will be cut.
Warning: When use above methed to stop running, the running belt will last
running for several seconds before completely stop.
To Next Page
Loading...