Trek 50 - Specifications

SPECIFICATIONS, cont.
All specifications are with no load unless otherwise noted.
GENERAL
Dimensions
148 mm H x 216 mm W x 432 mm D
(5.8” H x 8.5” W x 17” D).
Weight
Model 50/750-1 (one channel)
6 kg (14 lb).
Model 50/750-2 (two channels)
8 kg (18 lb).
High-Voltage Output Connector
MHV coaxial connector.
Amplifier Input
BNC coaxial connector.
Digital Enable Connector
BNC coaxial connector.
Power Requirements
Line Supply
Factory set for one of two ranges:
90 to 127 V AC or 180 to 250 V AC,
at 48 to 63 Hz.
Power Consumption
100 VA, per channel.
AC Line Receptacle
Standard three-prong AC line connector, with
an integral fuse holder, that supplies power to
all the amplifier channels of the instrument.
Operating Conditions
Temperature
0°C to 40°C.
Relative Humidity
To 85% noncondensing.
ACCESSORIES SUPPLIED
Operator’s manual, MHV mating connector for
each amplifier channel, and line cord.
CERTIFICATION
Trek, Inc. certifies that each Model 50/750
is tested and calibrated to specifications
using measurement equipment traceable
to the National Institute of Standards and
Technology or traceable to consensus
standards.
2B