TREMOL S25 - FUNCTIONAL AND INTERFACE SPECIFICATIONS; ECR Specifications Summary; Interface and Power Specifications

User manual TREMOL S25
7
FUNCTIONAL SPECIFICATIONS
ECR functional registers:
VAT Classes
5
FM Records
Total 2000 for Z-daily reports and special events
Cashiers
Total 20 with programmable name (20 characters) and password
(up to 6 digits)
Pay types
Total 5
1 main CASH (national currency)
3 additional (without exchange rate)
1 currency (with programmable rate towards the main pay type)
Departments
20 with programmable: name (30 characters)
1 (DEP.00) without programming option
Article
Up to 65000 with programmable: name (34 characters), measure
unit, price, price type parameter, VAT Class, Department
attachment, quantity in stock, parameter for quantity watch,
HSCode, HSDesc, single sale and barcode number.
Customers
300 with programmable: VAT Class, name, headquarter, address,
city
INTERFACE SPECIFICATIONS
Barcode scanner operation
ECR operates with barcode scanner USB type, allowing fast sales of articles with
barcode label in one of the standards: EAN13, EAN8, UPC-A, UPC-E. The ECR
recognizes automatically the barcode type.
Personal Computer communication
ECR communicates with PC in two main communication modes:
Programming and reporting communication mode is handy when the ECR
operates independent, but is necessary to summarize and store the sale data.
Fiscal printer communication mode for registering sales under PC control.
In this mode the sales are initiated by the PC. ECR keeps its data processing,
accumulated sums in non-volatile memory and stores turnover, VAT sums, counters and
events in fiscal memory.
ECR POWER SUPPLY
Electricity mains supply
ECR is supplied by external adapter 9.6V/ 2.75A.
Supply by built-in accumulator batteries. Charging
ECR TREMOL S25 has option to work with built-in batteries type Li-Pol 7.4V
>2000mAh and must be mounted by service center. The accumulator charging is
automatic when the ECR is plugged to the electricity mains. Full charge cycle is about 10
hours. With fully charged accumulators ECR prints at least 2000 notes with single sale
each and can endure 12 hours in stand-by mode. To provide longest battery life follow
these rules:
1. Always charge the batteries to maximum level;
2. Once plugged out, plug in again after few hours work;
3. If the ECR is not used more than 30 days, remove the batteries. .