User manual TREMOL S25
8
ECR CONSUMABLES AND THEIR REPLACEMENT
Depending on the ECR type two thermal paper rolls with following specifications: :
Paper roll replacement (feeding)
ECR monitors the availability of receipt and journal tapes and when it runs out of
either of them its operation is suspended and the message No PAPER is
displayed.
- Open the cover printer by lifting the lever.
- Remove the seals of the new tape. Place the tape with their heat-sensitive
surface down.
- Pull the loose end outside the groove and close the printer cover with slight
push.
- Press the key – the ECR resumes operation.
HOW TO USE THE PRESENT MANUAL
ECR operation manual provides numerous examples of its functions. The examples
follow a certain order, which is:
Text at the left of this symbol describes a concept, rule or function.
Text beside this symbol describes what is necessary to do to accomplish a function.
Example: Text on the side explains exactly what is shown in the example::
Text showing the entered data and ECR respond.
INSTALLATION AND PUTTING INTO OPERATION
The installation of ECR is programming of obligatory receipt attributes, the tax
group parameters as well as the desired number of article departments,
operators, etc.
The initial setting into operation (fiscalization) is a procedure for activation of the
fiscal memory of the ECR. It should be performed by a representative of the
service provider stated in the ECR passport in the presence of the tax-liable
person.
The installation of the ECR should be performed by an authorized specialist.
TYPES OF DOCUMENTS ISSUED BY ECR
All issued by the ECR documents have header containing data for the tax-liable
person and the trade object and footer with advertising text, receipt number, date and time
of the receipt, receipt type (fiscal or non-fiscal), and the ECR serial number. Until putting
To Next Page
Loading...
