TREND KWJ700 - Assembly and Adjustment; Recommended Cut Depths and Clearance; Correct Bolt Recess Depths; Types of Cuts

-9-
ASSEMBLY & ADJUSTMENT
Recommended Cut Depths and Clearance
Correct Bolt Recess Depths
40mm
Cut 1
3mm
Cut 2
8mm
Cut 4
Final cut
Cut 3
Worktop
Cut 5
40mm 28mm
30mm 20mm
Worktop
Worktop
PF
PF
Types of Cuts
Roughing Cuts
Set-up for roughing cuts.
Finishing Cut
Setting up for finishing cut.
Cutter
Sub baseGuide bush Ø30mm
Worktop
Template
PF
P Location pin
Cutter
Sub base
8.65mm
Worktop
Template
Guide bush Ø30mm
Template
PF
P Location pin
EN - KWJ700/900
Ensure router cutter tip clears underside by 3mm.