TREND WRT User Manual

WRT
ORIGINAL
INSTRUCTIONS
Please read these instructions before use.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.

TREND WRT Specifications

General

Category	Tools
Type	Wireless Router
Frequency Band	2.4GHz
Wireless Standards	IEEE 802.11n
Security	WEP, WPA/WPA2

Summary

Safety Guidelines and Definitions

Technical Data and Intended Use

Intended Use and Warnings

Defines the product's intended application and critical usage warnings.

General and Routing Safety

General Safety Precautions

Lists essential safety rules for operating power tools and workshop safety.

Routing Specific Safety

Outlines safety measures specific to router operations and tool usage.

Electrical Safety

Mains Plug and Extension Cable Safety

Covers safe practices for mains plug replacement and extension cable usage.

Preparation and Initial Assembly

Table and Leg Frame Assembly Overview

Provides an overview for assembling the main table structure.

Leg Frame and Bench Top Assembly Details

Router Compatibility and Mounting

Router Compatibility

Lists routers compatible with the insert plate and screw types.

Mounting Router to Insert Plate

Insert Plate and Rings Setup

Levelling the Insert Plate

Fence Assemblies

Back Fence Assembly and Fitting

Details assembling and attaching the back fence with scale.

Assembling Mitre Fence

Guard and Pressure Fitting

Fitting Top Guard & Top Pressure

Side Pressure Fitting

Operation: No-Volt Release Switch

Fence and Pushstick Adjustments

Back Fence Adjustment

Guides on adjusting the back fence position and fence cheeks.

Pushstick Operation

Details the correct usage of the pushstick for safe feeding.

Edge Moulding and Grooving

Feed Direction Guidelines

Explains correct feed direction and techniques for smooth results.

Stopped Moulding Procedure

Mitre Fence Operation

Lead-on Pin Operation

Edge Planing Technique