TREND WRT - Ec Declaration of Conformity; Items Enclosed

-5-
WRT
1 x Table top
4 x Legs
4 x Leg rails
4 x Feet
1 x Back fence and scale
2 x Fence cheeks
4 x Fence cheek knobs
1 x Top guard, top pressure and fixing knob
assembly
1 x Dust spout and fixing screws
2 x Back fence fixing knobs and bolts
1 x Side pressure and fixing knob assembly
2 x Edge planing rods
2 x Edge planing rod locking knob assemblies
8 x Leg rail fixing screws and washers
4 x Frame to top fixing screws and washers
1 x Insert plate and fixing screws
1 x No-volt release switch brackets and fixing screws
1 x Mitre fence assembly
2 x Insert rings
1 x Lead-on pin
1 x Pushstick
2 x Table top scales (fitted)
1 x T11 Quick Raiser handle park pin
2 x Cable management clips and screws
1 x Accessory hooks
1 x Hex key 3mm A/F
1 x Hex key 4mm A/F
1 x Router screw fixing pack
1 x Instructions
1 x Guarantee card
n Check for damage to the tool, parts or accessories
which may have occurred during transport.
n Take the time to thoroughly read and
understand this manual prior to operation.
ITEMS ENCLOSED
MARKINGS ON TABLE
The following pictures are shown on the tool.
Read instruction manual before use.
Date Code Position
The year of manufacture is on a label next to the
rating plate.
EC DECLARATION OF
CONFORMITY
MACHINERY DIRECTIVE
ROUTER TABLE
WRT
Trend declares that the attachment described
under Technical Data is in compliance with
2006/42/EC, and has been designed in
accordance with EN12100:2010,
EN62841-1:2015, EN60745-2-17:2010 Annex M.
The tool also complies with Directives
2014/30/EU and 2011/65/EU.
Pushstick is made in compliance with
Harmonized Standard EN 1870-19:2013.
For more information please contact Trend at the
following address or refer to back of manual.
The undersigned make this declaration on behalf of
Trend Machinery & Cutting Tools Ltd.
Technical Director
Neil McMillan
Trend Machinery & Cutting Tools Ltd
Unit 6 Odhams Trading Estate
St Albans Road, Watford
Herts, WD24 7TR
United Kingdom
01.01.2018
RESIDUAL RISKS
In spite of the application of the relevant safety
regulations and implementation of safety devices,
certain residual risks cannot be avoided. These
are:-
n Impairment of hearing.
n Risk of personal injury due to flying particles.
n Risk of burns due to accessories becoming
hot during operation.
n Risk of personal injury due to prolonged use