TREND WRT - Safety Guidelines and Definitions

WRT
CONTENTS
TECHNICAL DATA ____________________ 1
SAFETY ___________________________ 2-3
ELECTRICAL SAFETY _________________ 4
EC DECLARATION OF CONFORMITY ____ 5
ITEMS ENCLOSED ____________________ 5
DESCRIPTION OF PARTS ______________ 6
ASSEMBLY ________________________ 7-17
- Router Compatibility __________________ 9
- Mounting Router to Insert Plate _________ 10
- Mounting Table to Workbench _________ 11
- Mounting No Volt Release Switch _______ 11
- Levelling the Insert Plate ______________ 12
- Fitting Insert Rings __________________ 12
- Fitting Back Fence ___________________ 13
- Fitting Guards ____________________ 14-15
- Fitting Mitre Fence and Pushstick _______ 16
- Fitting Cable Management Clips ________ 17
OPERATION
- No-Volt Release Switch _______________ 18
- Back Fence Adjustment ______________ 19
- Edge Moulding and Grooving __________ 20
- Stopped Moulding ___________________ 21
- Mitre Fence ________________________ 22
- Lead-On Pin _______________________ 23
- Edge Planing _______________________ 23
ACCESSORIES _____________________ 25
MAINTENANCE _____________________ 26
ENVIRONMENTAL PROTECTION ______ 26
GUARANTEE _______________________ 26
SPARE PARTS
- Spare Parts List ___________________ 27-28
- Spare Parts Diagram __________________ IB
Dear Customer
Thank you for purchasing this Trend product,
we hope you enjoy many years of creative and
productive use.
Please remember to return your guarantee card within
28 days of purchase.
Please read these instructions before use.
☎
If you require further safety advice, technical information
or spare parts, please call Trend Technical Support or visit
www.trend-uk.com
Definitions: Safety Guidelines
The definitions below describe the level of sever-
ity for each signal word. Please read the manual
and pay attention to these symbols.
The following symbols are used throughout this
manual:
WARNING: indicates a potential
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result
in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Additional Symbols Used
Wear Personal Protective Equipment
(PPE). Ear, eye and respiratory
protection must be worn.
Denotes risk of personal injury, loss of
life or damage to the tool in case or
non-observance of the instructions in this
manual.
Refer to the instruction
manual of your power tool.