-26-
MAINTENANCE
The router table has been designed to operate over a
long period of time with a minimum of maintenance.
Continual satisfactory operation depends upon proper
tool care and regular cleaning.
n Replace the cutter insert when worn out.
Cleaning
n Keep the grooves clear of sawdust.
Regularly clean the table with a soft cloth.
n The pushstick is made of thermoplastic
material which is resistant to solvents, oils,
greases and water. Do not use concentrated
acids or alkalies for cleaning.
Lubrication
n Your router table requires no additional
lubrication. Do not use PTFE spray on the
plastic components of the table.
Storage
n When not in use the table should be stored
safely. It is advisable to cover the table.
n The pushstick is provided with holes to store
easily on the table.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
as waste.
Accessories and packaging should be sorted for
environmental-friendly recycling.
Separate collection. This product must not be
disposed of with normal household waste.
Household User
Local regulations may provide for separate collection
of electrical products from the household, at munici-
pal waste sites or by retailer when you purchase a new
product.
Please call Trend Customer Services for advice as to
how to dispose of unwanted Trend electrical products
in an environmentally safe way or visit www.trend-uk.
com
Business User
Please call Trend Customer Services for disposal of
unwanted Trend electrical products.
GUARANTEE
The unit carries a manufacturers guarantee in accord-
ance with the conditions on the enclosed guarantee
card.
For the location of your nearest Trend Service Agent,
please call Trend Customer Services or see Stockist
Locator at www.trend-uk.com
To Next Page
Loading...
