TREND S108 - Idle Mode Screen Events; Installing Battery and RUIM Card; Installing the Battery; Removing the Battery

S108 User Guide
12
Outdoor: For use in the outdoor.
Headset: For use when insert the headset.
2.2.2 Idle mode screen events
2.2.2.1 Idle mode
The mobile phone enters idle mode without any operations after the phone is switched on.
You can view the current time and date in idle mode. You can dial a number by pressing
key if you input a telephone number.
2.2.2.2 Calling
You can make a phone call after the number is dialed.
2.2.2.3 Missed calls
The missed calls and their numbers will be shown on the screen in idle mode. Press right
soft key to view the list.
2.2.2.4 New messages
When the new message is received:
1. Your phone makes alert tones (ringer, vibration or silence).
2. If the keypad is unlocked, your phone display will show ‘You have 1 new message!’
Press left soft key to view the message’s contents and then press left soft key again
to operate options. Press right soft key or power/end key to return to the idle mode,
the new message-prompting icon is displayed on the screen.
3. If the keypad is locked, your phone display will also show ‘You have 1 new
message!’ But you can’t view the contents.
Note: If the message is urgent /emergency, your phone displays ‘You have 1 new message
(Urgent/Emergency)! ’.
2.3 Installing Battery and RUIM card
2.3.1 Installing the battery
z Aim the protruding part at the bottom of the battery at the groove of the phone.
z Push the top part of the battery to the phone and press down the lock until it is locked.
2.3.2 Removing the battery
Switch off the phone, push up the lock at the top of the battery to uplift the top of the