S108 User Guide
36
screen, then you can type the first letter in uppercase. When you have typed the first
letter, ‘Abc’ will be changed to ‘abc’ automatically.
2. Tap the
key several times until ‘abc’ is displayed in the top-right corner of the
screen, then you can type in lowercase letters.
3. Tap the
key several times until ‘Abc’ is displayed in the top-right corner of the
screen, then you can type in lowercase letters.
4. Press desired number key, once to input a character, twice to display the second
character, by analogy to finish the text.
The following steps show how to write a text by using these input methods:
1. In text-editing mode, tap
key several times until ‘En’ is displayed at the top-right
corner of the screen.
2. Press each key once, even when the letter you required is not the first letter on the key.
For example, to enter the word ‘Mary’, press 6,2,7,9 key.
3. During inputting, you can press
key, then press the corresponding number key.
4. Press 0 key to add a space.
4.3 Entering symbols
1. Press the key to enter the special character library.
2. Press up/down navigation key to select the symbol you need.
3. Press the corresponding number key.
5. USB windows device driver installation guide
5.1 Introduction
This document is a user guide for USB Windows device driver installation process. The
USB Windows device driver provides the interface between the operating system and
Z-222 handsets, allowing user applications to communicate with devices. This installation
guide is intended to provide a detailed description of the USB Windows device driver
installation process.
To Next Page
Loading...