TREND S108 - Entering Your Phone Lock Code; Dialing a Number; Using the Digits Keys

S108 User Guide
15
z Press left soft key, and after a short time, your mobile phone will confirm its
correctness and begin to register on the network. Once the network name is shown
on the screen, you can call or access any of the functions of your phone. If no
network name is shown on the screen, you may need to register again.
Note:
If you have entered the PIN code incorrectly continuously for max retries limits, the RUIM card will be
automatically locked. In this condition, the phone will prompt for PUK (PIN Unlocking key). You can get
the PUK from your mobile phone service provider.
2.6.2 Entering your Phone Lock Code
The phone lock code is used to protect your phone from unauthorized use.
It can be set to automatically lock your phone each time it is switched on or when in idle
mode. In this condition, you can only dial emergency call.
You must press right soft key to enter correct phone lock code, and then access the
phone menu (The default is 0000).
The PIN code and Phone lock code can be changed.
2.7 Dialing a number
To dial a number, your phone must be switched on and unlocked.
You can use the function only after the network-prompting icon is shown on the screen.
2.7.1 Using the digits keys
Enter district code and telephone number or mobile phone number, press key to
dial.
z Press right soft key to delete a typed number. Press and hold right soft key to
delete all numbers.
z To indicate that you are dialing a number, the word Calling displays the screen.
z If the call is not answered and you want to end the call, press
key.
z If the call is answered, the display will change to Call Connected，press
key to
end the call.