S108 User Guide
23
3.2.4 Erase history
You can erase the all Call History with this menu.
3.2.5 Call duration
This function allows you to display the duration of your last call, total received call, total
dialed call and lift time, and also to reset your time counter to zero.
3.2.5.1 Last Call
Phone displays the time used by the last call since the counter was reset.
3.2.5.2 Total Received Calls
Phone displays the time used by received calls since the counter was reset.
3.2.5.3 Total Dialed Calls
Phone displays the time used by dialed calls since the counter was reset.
3.2.5.4 Reset all
You can reset the counter of the calls timer to zero.
3.2.5.5 Life time
Phone displays the total duration used by all calls and the total number of calls since the
counter was reset.
3.3 Profiles
The profiles function provides a quick and convenient way to reset your mobile phone
setting for a particular environment (e.g. to set your mobile for not ringing when you are in
a meeting, or increasing the volume of the ring tone when outside). Each profile has a
factory default; however you can adjust each profile to suit your requirements.
How to activate a profile
1. Press left soft key to access the profile function.
2. Press up/down key to highlight the profile you wish to activate, then press left soft key
to enter.
3. Press up/down key to highlight the ‘Select profile’ option, then press left soft key to
activate.
Note: For short access to the profile mode press up navigation key in idle mode.
When a profile is set, the icon which corresponds to the profile name is displayed on idle screen.
How to customize a profile
1. Press left soft key to access the profile function.
To Next Page
Loading...