EasyManua.ls Logo

TRENDnet TEG-3102WS - User Manual

TRENDnet TEG-3102WS
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TRENDnet Users Guide
Cover Page

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TEG-3102WS and is the answer not in the manual?

Summary

System

System Settings

Configure system name, location, contact info, and description.

SNMP

Configure Simple Network Management Protocol (SNMP) global settings and user lists.

MAC Address Table

Manage static and dynamic MAC addresses, and set MAC aging time.

IEEE 802.3 az EEE

Enable or disable IEEE 802.3az Energy Efficient Ethernet power saving mode.

Network

Physical Interface

Configure port parameters like speed, duplex, flow control, and jumbo frames.

VLAN Settings

Configure VLANs, including 802.1Q, PVID, and Ingress Filter settings.

Spanning Tree

Configure Spanning Tree Protocol (STP), RSTP, and MSTP for network loop prevention.

IGMP Snooping

Configure IGMP snooping global settings, fast leave, and querier settings.

Voice VLAN

Configure Voice VLAN feature for high-quality, uninterrupted voice traffic.

PoE (Power over Ethernet)

Power Budget

Configure the maximum PoE budget and prioritize power delivery to connected devices.

Configure PoE Port Settings

Manage PoE state, priority, power limit type, and schedule for each port.

PD Lifeguard

Configure PD Alive Check to monitor device connection and attempt revival.

Security

802.1 X Authentication

Configure 802.1X port-based network access control, guest VLAN, and authentication methods.

Access Control (MAC ACL)

Create and configure MAC Access Control Lists (ACLs) to filter traffic.

DHCP Snooping

Configure DHCP Snooping to prevent rogue DHCP servers and validate ARP packets.

Denial of Service (DoS)

Configure DoS prevention features to restrict specific types of traffic associated with attacks.

Tools

Firmware Upgrade

Upgrade the switch's firmware using HTTP or TFTP methods.

Config Backup Restore

Backup and restore switch configurations via HTTP or TFTP for disaster recovery.

Diagnostics

Perform cable diagnostics, ping tests, and trace routes for network troubleshooting.

Summary

System

System Settings

Configure system name, location, contact info, and description.

SNMP

Configure Simple Network Management Protocol (SNMP) global settings and user lists.

MAC Address Table

Manage static and dynamic MAC addresses, and set MAC aging time.

IEEE 802.3 az EEE

Enable or disable IEEE 802.3az Energy Efficient Ethernet power saving mode.

Network

Physical Interface

Configure port parameters like speed, duplex, flow control, and jumbo frames.

VLAN Settings

Configure VLANs, including 802.1Q, PVID, and Ingress Filter settings.

Spanning Tree

Configure Spanning Tree Protocol (STP), RSTP, and MSTP for network loop prevention.

IGMP Snooping

Configure IGMP snooping global settings, fast leave, and querier settings.

Voice VLAN

Configure Voice VLAN feature for high-quality, uninterrupted voice traffic.

PoE (Power over Ethernet)

Power Budget

Configure the maximum PoE budget and prioritize power delivery to connected devices.

Configure PoE Port Settings

Manage PoE state, priority, power limit type, and schedule for each port.

PD Lifeguard

Configure PD Alive Check to monitor device connection and attempt revival.

Security

802.1 X Authentication

Configure 802.1X port-based network access control, guest VLAN, and authentication methods.

Access Control (MAC ACL)

Create and configure MAC Access Control Lists (ACLs) to filter traffic.

DHCP Snooping

Configure DHCP Snooping to prevent rogue DHCP servers and validate ARP packets.

Denial of Service (DoS)

Configure DoS prevention features to restrict specific types of traffic associated with attacks.

Tools

Firmware Upgrade

Upgrade the switch's firmware using HTTP or TFTP methods.

Config Backup Restore

Backup and restore switch configurations via HTTP or TFTP for disaster recovery.

Diagnostics

Perform cable diagnostics, ping tests, and trace routes for network troubleshooting.

TRENDnet TEG-3102WS Specifications

General IconGeneral
Switch typeManaged
Switch layerL2/L3/L4
Web-based managementYes
Multicast MAC address table256 entries
Multicast Listener Discovery (MLD) snoopingv1, v2
IPv4 & IPv6 featuresIPv4/IPv6 access-control list (ACL)
Installed SFP modules quantity0
Installed SFP+ modules quantity2
Basic switching RJ-45 Ethernet ports type10G Ethernet (100/1000/10000)
Basic switching RJ-45 Ethernet ports quantity8
CertificationCE, FCC
Product colorBlack
Rack mounting-
Housing materialMetal
Mean time between failures (MTBF)893944 h
Number of VLANs256
Networking standardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3x, IEEE 802.3z
Jumbo frames1
Forwarding rate59.52 Mpps
MAC address table32000 entries
Packet buffer memory1.5 MB
Number of IP interfaces6
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Cables includedAC
Weight and Dimensions IconWeight and Dimensions
Depth104 mm
Width240 mm
Height27 mm
Weight664 g

Related product manuals