24 -- Configuring Wireless Security
C
ONFIGURING
WPA-PSK & WPA2-PSK
Refer to the following to configure WPA-PSK & WPA2-PSK.
Click the drop-down arrow at Security Mode and choose WPA-PSK / WPA2-PSK.
1. Click the drop-down arrow at Encryption Method and choose TKIP or AES. (Most access
points use TKIP for WPA-PSK & AES for WPA2-PSK.)
2. At PSK Passphrase enter the same pass phrase used to configure the WPA-PSK or
WPA2-PSK on your access point.
To Next Page
Loading...
