Need help?Do you have a question about the TRENDnet TFC-110 and is the answer not in the manual?
Defines the media converter based on IEEE standards for 10BASE-T, 100BASE-TX, and 100BASE-FX.
Details environmental and location requirements for optimal equipment placement.
Instructions for connecting the media converter to a power source.
Explains the duplex mode setting using the sliding switch.
Guide for mounting the converter into a compatible chassis system.
Defines the media converter based on IEEE standards for 10BASE-T, 100BASE-TX, and 100BASE-FX.
Details environmental and location requirements for optimal equipment placement.
Instructions for connecting the media converter to a power source.
Explains the duplex mode setting using the sliding switch.
Guide for mounting the converter into a compatible chassis system.
General| Media Converter Type | Fast Ethernet |
|---|---|
| Standards | IEEE 802.3, IEEE 802.3u |
| Ethernet Ports | 1 x 10/100Base-TX RJ-45 |
| Fiber Ports | 1 x 100Base-FX SC |
| Fiber Connector | SC |
| Fiber Type | Multi-Mode |
| Wavelength | 1310nm |
| Data Transfer Rate | 100 Mbps |
| LED Indicators | Power, Link/Activity |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Operating Humidity | non-condensing |
| Power Consumption | 2.5 Watts (max.) |
To Next Page
