4
Product Features
?? One-channel media conversion between
10/100BASE-TX and 100BASE-FX
?? Fiber media allows: multi-mode fiber using SC,
LC, or MT-RJ connector; single-mode fiber using
SC connector
?? Auto negotiation of speed and duplex mode on TX
port
?? Auto MDI-X on TX port
?? One slide switch for configuring fixed half/full
duplex modes
?? Store-and-forward mechanism
?? Back-pressure & IEEE802.3x compliant flow
control
?? Full wire-speed forwarding rate
?? Front panel status LEDs
?? Used as a stand-alone device or with a chassis
?? Hot-swappable when used with a chassis
To Next Page
Loading...
