- 27 -
z Add user: You can add user of the storage server by entering a
name in the User name box, and the corresponding password in
the Password box. When completed, click Apply to activate the
user’s account.
z Remove user: You can delete an existing user’s account in this
option. Check the box associated to the user you want to delete
and click Apply.
z Modify user: You can change the password of an existing user’s
account. Select the radio button associated to the user you want
to modify and click Apply. Enter the original password in the
Old password box, and then enter a new password twice in the
New password and Retype new password boxes. When
completed, click Apply.
z User list: Click this item to display the existing users of the
storage server.
NOTE:
1. The storage server uses four pre-defined accounts in the
firmware, which cannot be used as the users’ account
names, including: root, admin, ftp, and nobody.
2. The password you entered in the Password box must be
longer than five characters.
To Next Page
Loading...
