Triax ST-220 - Connect Your Receiver

Seite 18 von 72
Connect your receiver
Connect your receiver via a coaxial cable to the antenna outlet

Coaxial cable is not supplied with this package.
Attention!
Connect the receiver to the mains when you have connected it to
all equipment and the antenna. Otherwise, the receiver may be
damaged.
The wire mesh and the inner core of the coaxial cable carry cur-
rent during operation.
Attention!
Note for network separation: The standby button does not discon-
nect the device from the mains. In standby mode the device con-
sumes power. To completely disconnect from the mains set power
switch to "off" please.