The receiver should not be wet. Never clean it with a wet cloth.
Do not use solvent-based cleaning agents such as benzine or
thinner. These can damage the surface of the housing.
Clean the exterior of the receiver only with a dry cloth.
Clean the display of the receiver with a slightly damp cloth.
Dismantle the receiver
Disconnect the receiver and connected equipment from the
power supply.
Loosen the LNB cable from the receiver.
Remove the batteries from the remote control if you do not
use the receiver for a longer time.
Pack the receiver, the cables and the remote control in the
box.
Store the receiver and all accessories in a dry, dust-free ar-
ea.
Protect it from frost.
To Next Page
Loading...
