Trident wall charger - All connection
points must be dry before charging.
Attach D-ring connector to Trident only.
6
Trim weights - Not needed in freshwater.
To maintain neutral buoyancy in
saltwater, attach to the underside of
Trident. This location is indicated by a
weight symbol.
7
Trident Underwater Drone.
1
Tail strap - Improves tether integrity
when handling Trident via tether.
2
Tether & charger connection point -
Connection point must be dry before
connecting tether or charger.
3
Topside - Sends video and control data
to and from Trident to the controller via
WiFi hotspot.
5
25m tether - Kevlar-reinforced data
cable that sends video and control data
from the topside to Trident. It has the
same D-ring connector on each side.
4
1
2
3
5
4
6
In the box:
7
DOC-000007-03
To Next Page
Need help?
General