Trident TVGA8900CL - Page 31

10.
11.
(e.g. Novell), you may need to select an interrupt value other than
the default value (i.e. 7B, 7C, 7D). Ifso, besure to use the same
interrupt value for all AutoDesk programs (AutoCAD, AutoShade,
etc.)
Select Normal or Black background. For details on background
color, please reference Special Options for Releases 9 and 10
below.
Select Dual Screen or Single Screen mode (Y -Dual Screen mode, N-
Single Screen mode). For details on dual-screen or single-screen
modes, please reference Special Options for Releases 9 and 10
below.
The remaining steps need to be completed inside AutoCAD. They
are listed ina text window. You may note them down or reference
steps 9 through 11.
Exit the Driver/Utility Installation program.
Start AutoCAD and bring up the configure AutoCAD menu.
Reconfigure the video display by selecting ADI display Vx.x.
To load the driver: exit AutoCAD, reboot your system, and enter
DSVGA on the command line. When you start AutoCAD, the
graphics display will be at the resolution you selected.
NOTE: Please consult your AutoCAD Users Guide for additional
information on driver installation.
Special Options for Releases 9 and 10
Dual Monitor Support
The drivers for Releases 9 and 10offerspecial options. In your AutoCAD
manual, you will notice that AutoCAD offers support for both single and
dual monitors. For the dual monitor feature, use a monochrome card and
monitor in combination with your VGA adapter and graphics monitor.
4-11