Trident TVGA8900CL - 4-3.1.5 Autodesk Animator Pro

9.
Type "Y" to save the configuration settings.
10. Click "OK" to close Rendering Preferences menu.
= 43414
4-3.1.5
Autoshade 2.0 and 3D Studio
AutoCAD/386 drivers can also be used with Autoshade 2.0 and 3D
Studio. Please refer to section 3.1.2 for instructions on copying the
AutoCAD/386 display driver (RCPTVGA.EXP) to your Autoshade
2.0 or 3D Studio.
For Autoshade 2.0 the following set commands must be added to
your Autoexec.bat file:
SET DSPADI RCPTVGA
SET RDPADI - RCPTVGA
For 3D Studio the following set command must be added:
SET RCPADI = (3D Studio Directory) \RCPTVGA.EXP
Use any ASCII text editor (e.g. EDIT.EXEcommand) to modify the
Autoexec.bat.
Consult your Autoshade 2.0 and 3D Studio manuals for additional
information on how to configure these programs for high resolution
drivers.
AutoDesk Animator Pro
AutoDesk Animator Pro supports VESA (Video Electronic Standard
Associate) driver. If your adaptor is equipped with a VGA BIOS that is
version C3.0 or later, you can select VESA driver from the Animator Pro
video configuration option. If your VGA card is equipped with an earlier
version
of
BIOS,
you
can
load
a
TSR
program
called
VESA.EXE
prior
to executing Animator Pro and select VESA driver from the Animator
Pro video configuration option. Please see section 2.2.2 for more
information on VESA BIOS Extension.
4-17