Trident TVGA8900CL - Page 36

e: Type "Y" to select a display resolution. Select the desired
resolution. NOTE: Be sure that your adaptor has the required
DRAM necessary to support the selected resolution. Please
refer to the hardware manual for information regarding
DRAM requirements.
f: AutoCAD 12 will display prompts to allow you to adjust the
color settings. To select the default settings, hit «Return». To
select a different ADI 4.2 display function, please refer to
your AutoCAD User's Reference Manual.
g: Type "0" to exit the Drawing Editor Screen.
h: Type "Y" to save the configuration settings.
To install display drivers for AutoCAD 12 Rendering
Complete the following steps within AutoCAD 12 to install the display
driver for rendering:
1. Make sure you have installed Rendering for AutoCAD 12.
2. Inthe Drawing Editor screen, select "Preferences" from the "Ren-
der" menu.
3. Ifyouhave previously configured Preferences for Rendering, select
"Reconfigure" from the Rendering Preferences menu. Otherwise,
AutoCAD 12 will switch directly to a text screen.
4. Select Option 2 to "Configure Rendering Device"
5. Select "AutoCAD's P386 ADI Combined Display/Rendering De-
vice".
6. Select your resolution preference for rendering.
7. Select your Rendering View Preference.
8. Type "0" to exit the Drawing Editor Screen.