Trident TVGA8900CL - Autocad 12

The color numbering scheme for 16-color modes (15 colors plus
black) is:
1 - Red 9 - Low intensity red
2 - Yellow 10 - Low intensity yellow |
3 - Green 11 - Low intensity green ae
4 - Cyan 12 - Low intensity cyan
5 - Blue 13 - Low intensity blue
6 - Magenta 14 - Low intensity magenta
7 - White | 15 - Light grey
8 - Dark grey
The color numbering scheme for 256 color modes matches that
defined in the AutoCAD/386 Installation and Performance Guide
for IBM's 8514 Adapter.
Refer to the IBM Video Graphics Array Video Display Option in
Autodesk's Installation and Performance Guide for more detailed
information on the color select prompts for 16 color and 256 color
modes.
8. You have completed the driver installation for AutoCAD/386. If
you need to reconfigure for a different resolution, repeat steps 5 —-
through 7, then run AutoCAD as usual.
4-3.1.3 AutoCAD 12
There are two options for AutoCAD 12 display drivers. You can either
use the VESA driver that comes with AutoCAD 12 or the AutoCAD 12
driver that is on your Driver/Utility diskette.
Option 1: Using the VESA driver
AutoCAD 12 supports VESA (Video Electronic Standard Associate)
driver. If youradaptor is equipped witha VGA BIOS that is version C3.0
or later, you can justselect VESA driver from the ACAD Configuration
Option. If your VGA card is equipped with an earlier version of BIOS,
you can load a TSR program called VESA.EXE (please refer to Section
2.2.2) prior to executing ACAD 12 and select VESA driver from the
4 - 14